issues - Lithne

  • Known Issues

    Analog read

    - the highest value (1023) is reached at around 2v instead of 3v3. This for instance means that you can use only 2/3rd of a slider's range. This is most likely caused by arroneous setting of the reference voltage.  

     

    +5v

    The 5 volt is only available when an external power supply is connected. It is not available when power is supplied by USB or the power board.

     

    Pin Naming / Numbering

    Pins are named A0 - A15 and D0 - D20. These are the only references to the Pins you can use. Do not use regular numbering in order to prevent unexpected behaviour.

     

    Unresolved issues - [require maintainanace]

    Signal Strength

    Signal Strength measurements (dbMeasurements) are not received in the main processor.